Description

New product with 2-year warranty. The stated price is net plus VAT; an invoice will be issued. The professional 2-channel Class-D high-power amplifier is equally suitable for mobile applications and fixed installations. Thanks to its compact, lightweight construction, high output power and excellent efficiency, it is particularly well suited for touring racks and installations with limited space. The integrated, newly developed DSP section enables extensive processing and flexible distribution of signals. Available functions include various filters, parametric equalizers, delays, phase inversion, FIR filters, compressor, limiter, expander, noise gate, signal generator, feedback suppression and automixer. High-quality AD and DA converters ensure precise, high-resolution reproduction and reliable signal integrity. Sampling rates up to 96 kS/s with a resolution of up to 32 Bit are supported. The analog input stages are designed for clean dynamic response and reliable operation. Separate limiters, a programmable output limiter and intelligent protection circuits protect the amplifier and loudspeakers even under demanding operating conditions. The graphic LCD, two jog controls and additional buttons enable fast configuration and diagnostics directly on the device. The system can also be remotely controlled and configured via the Ethernet interface using the DSP-Control software. Up to five user profiles can be saved and recalled. The high-frequency resonant switch-mode power supply with active power factor correction, the wide mains voltage range and the regulated forced-air cooling support reliable continuous operation in touring and installation applications. Features: 2-channel high-power amplifier with integrated DSP section High output power with very good efficiency Modern high-frequency switching technology Compact and lightweight construction for touring applications AES67 reception DSP-Control software for simple system configuration Graphic LCD for setup and diagnostics Two jog controls for fast navigation Digital control of volume and input sensitivity Integrated, programmable limiter Capture of output peak and average values for voltage and current Display of actual load impedance Separate limiters for optimized dynamic processing of the analog inputs Five storable user profiles Intelligent protection functions High-frequency resonant power supply with active PFC Wide permissible mains voltage range Technical data Output power at 16 Ohm: 2 × 1000 W Output power at 8 Ohm: 2 × 1900 W Output power at 4 Ohm: 2 × 3650 W Output power at 2.6 Ohm: 2 × 3000 W Output power at 2 Ohm: 2 × 3500 W Minimum load impedance: 2 Ohm Frequency response (+/−3 dB at 8 Ohm): 5 Hz - 22 kHz Damping factor: > 600 Signal-to-noise ratio (A-weighted, 20 Hz - 20 kHz): 107 dB Nominal balanced input sensitivity for maximum output level: 1.7 V RMS Input impedance to ground: 10 kOhm + 10 kOhm (±1 %) Power amplifier stages: High-frequency, semi-soft-switched PWM power amplifier stages in balanced configuration DSP functions: High-pass filter, low-pass filter, parametric equalizer, delay, phase inversion, FIR filter, compressor, limiter, expander, noise gate, signal generator, feedback suppression, automixer DSP presets: Up to 20 user presets plus 1 factory preset DSP sampling rate / bit depth: 48 / 96 kHz, 16 / 24 / 32 Bit DSP and digital audio latency: Adjustable from 1 to 5 ms Digital audio channels: 2 input channels / 2 output channels via Ethernet Digital audio standards: AES67, ST2110-30, Ravenna Integrated limiter: Adjustable Advanced Output Limiter with 1 V per step, Limiter Wizard for impedance and power, separate AD input limiter Adjustment range of the Advanced Limiter: 10 - 170 V Output level display: LED bargraph and status LEDs for AGR, short circuit, temperature, protection and Ready Visual status display: LED bargraph, status LEDs and graphic display Display: Graphic LCD Controls: Jog wheels, buttons and DSP-Control software Volume control: Via jog wheels or remote control from −95.5 dB to 0 dB in 0.5-dB steps Input sensitivity: −95.5 dB to 0 dB in 0.5-dB steps Mains requirement: 160 - 270 V AC, 50 / 60 Hz Maximum power consumption: 7900 W Soft start: Yes Power supply: High-frequency resonant power supply with active PFC Mains connection: Neutrik Powercon Protection functions: ADC input limiter, short-circuit, overload, low-impedance, thermal and DC fault protection Cooling: Forced-air cooling with regulated DC fans Airflow direction: Front to back Remote control: Ethernet 10 / 100 / 1000 Mbps via DSP-Control software Operating temperature range: 0 - 40 °C Storage temperature range: −25 - 60 °C Weight: 9.5 kg Dimensions: 19" rack, 483 × 440 × 44 mm (1 RU)

Specifications