Description

Hi everyone, Up to two used power amplifiers are for sale. The price of €950 net applies to one unit. If both units are purchased, a package price of €1,800 net is possible. The operating time for both power amplifiers is only approximately 125 hours. However, one unit displays an operating time of only a few minutes; why this value differs is not known. The sale is exclusively intended for commercial customers (B2B) and is made without warranty for the used equipment. Shipping can be arranged, but on-site collection and the option to test the unit beforehand are preferred. Payment by instant bank transfer or in cash upon collection. In the case of shipping, payment must be made in advance by bank transfer. If interested or if you have any questions, please get in touch. :) Technical specifications according to the manufacturer: Load Impedance 2Ω 2.7Ω 4Ω 8Ω Maximum Output Power, Single Channel 2Ω= 3200W; 2.7Ω= 2700W; 4Ω= 1800W; 8Ω= 950W Maximum Output Power, Dual Channel 2Ω= 3000W; 2.7Ω= 2500W; 4Ω= 1700W; 8Ω= 900W Maximum Output Power, Bridged 4Ω= 6000W; 8Ω= 3400W Maximum RMS Voltage Swing, THD = 1%, 1kHz 90.6V Voltage Gain ref.1kHz 32.0dB IMD-SMPTE, 60 Hz, 7 kHz <0.1% DIM 30 <0.05 Maximum Input Level +21dBu Crosstalk -80 Frequency Response 10 Hz to 21 kHz (±1 dB) Input Impedance, active balanced 20kΩ Signal-to-Noise Ratio (A-weighted) >109 Output Noise, A-weighted <-68dBu Output Stage Topology Class H Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) Power Consumption 850 W Protection Audio limiters, high temperature, DC, HF; Back-EMF, Peak current limiters, Inrush current limiters, Turn-on delay Cooling Front-to-rear, 3-stage fans Safety Class I Available Color Black Height 88 Width 483 Depth 462.4 Weight Net 18.2 Signal Processing FIR filters, audio limiters, output and array delay, 10-band user PEQ, 5-band array PEQ per channel, load impedance Total Harmonic Distortion <0.05 Operating Temperature Range +5°C to +40°C (40°F to +105°F) Remote control SONICUE sound system software (requires firmware 2.0) Mains Fuse 240 V/230 V= T10AH; 120 V/100 V=T20AH

Specifications