Description

– **SDI inputs:** 20 connections for 10-bit SD-SDI, HD-SDI and 6G-SDI. – **SDI outputs:** Likewise, 20 outputs for 10-bit SD-SDI, HD-SDI and 6G-SDI. – **Reference signal:** Supports Blackburst and Tri-Sync for SD, HD and 4K productions. – **Multi-rate operation:** SD, HD and 6G-SDI signals are detected automatically. 4K, HD, SD video and DVB-ASI can be routed simultaneously. – **Firmware and system updates:** Via the USB-2.0 High-Speed interface with 480 Mb/s or via Ethernet. – **Operation:** 21 buttons enable local control. An additional 6 buttons and a scroll wheel are used to operate the LCD display. Control is also possible via RJ45 Ethernet. – **Configuration:** Setup can be performed directly via the LCD on the front panel. Alternatively, RJ45 Ethernet and the USB-2.0 interface are available; USB can be used exclusively for setting the IP address. – **RS-422 control:** One input for controlling crosspoint switching. – **Reclocking:** The SDI outputs automatically adapt to SD, HD or 6G-SDI video signals and switch independently between the respective formats. – **Supported SD formats:** 625/25 PAL, 525/29.97 NTSC and 525/23.98 NTSC. – **Supported HD formats:** 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60. – **Support for 2K:** 2048x1080p23.98, 2048x1080p24, 2048x1080p25, 2048x1080PsF23.98, 2048x1080PsF24 and 2048x1080PsF25. – **Support for 4K:** 33840x2160p23.98, 3840x2160p24, 3840x2160p25, 3840x2160p29.97, 3840x2160p30 and 4096x2160p24. – **SDI standards:** SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 310M, SMPTE 425M-A, SMPTE 425M-B, ITU-R BT.656 and ITU-R BT.601. – **SDI data rates:** The inputs can be switched between SD, HD and 4K. Supported are 270 Mb/s for standard-definition SDI, 1.5 Gb/s for HD-SDI, as well as 3G-SDI and 6G-SDI. – **SDI video sampling:** 4:2:2 and 4:4:4. – **SDI audio:** Standard TV sampling rate with 48 kHz and 24 bit. – **Colour resolution:** 10 bit in 4:2:2 and 4:4:4 quality. – **Colour space:** YUV or RGB. – **Automatic SDI detection:** All inputs automatically switch between SD-SDI, HD-SDI, 6G-SDI and DVB-ASI. This allows each input to use its own television standard. – **SDI metadata:** Support for additional Video Payload Identifier data according to SMPTE 352M.

Specifications