Description

For sale is a used power amplifier. One channel is permanently in the load state (“dauer load”) and is therefore not functional. The second channel works perfectly. The device shows some signs of use in the form of scratches – please refer to the photos. In addition, a foam filter is missing from the front. This can easily be reproduced or alternatively omitted. The operating-hours display shows 102637 hours (see photo). Technical specifications according to the manufacturer: - Integrated BSS-DSP for precise sound reproduction and optimal loudspeaker control - Class-I technology with high efficiency and reliable operation - FIR filters for phase correction and coloration-free reproduction - Impedance monitoring and fault memory for monitoring and fault diagnosis - Analogue and digital inputs with priority switching for redundant signals - 2x 3000 Watt at 2 Ohm (20-ms-Burst) - 2x 2000 Watt at 2 Ohm - 2x 2500 Watt at 4 Ohm - 2x 1250 Watt at 8 Ohm - 1x 5000 Watt at 8 Ohm, mono bridged - 1x 4000 Watt at 4 Ohm, mono bridged - Damping factor: >5000 - Signal-to-noise ratio: >112 dB (A-weighted) - Input sensitivity: 1.4–7.75 Volt in 0.1-dB increments - Network connection via Cat5 - USB connection for a memory stick with presets - Inputs: analogue XLRw and XLRw as well as digital XLR - Outputs: Speakon connectors and screw terminals - Height: 2 HE - Installation depth: 41.1 cm - Weight: 12.7 kg The sale is exclusively to commercial customers (B2B) and excludes any further warranty. Shipping is possible for 15 Euro.