Description

NEW: Second-generation indoor LED wall with advanced technology, optimized system structure and particularly brilliant image display. Further information about the solution: https://www.led-tek.de/indoor-led-wand-p2bl-pro A product video for the PRO series can be found here: https://youtu.be/63TTuG7sd2E The new indoor version expands the existing PRO family and complements its already established all-round carefree concept. The frame, construction principle and key features correspond to the other walls in this series. This allows the new solution to be seamlessly combined with existing components. ## Indoor LED wall for professional applications The pixel pitch is 2.97 mm. This makes convincing display possible from a viewing distance of approximately 3 m. This makes the LED wall particularly interesting for presentations, trade fairs, stages and other indoor events where the distance between the audience and the screen is limited. With a brightness of up to 1,000 Nits, the display delivers a sharp, high-contrast image. The brightness can be reduced depending on the spatial conditions and adjusted to suit the respective environment. The IP30 protection rating protects against solid foreign bodies and against access to dangerous parts using a tool. In addition to indoor use, the wall is therefore also suitable for well-protected or covered outdoor areas. Robust SMD-2020-LEDs are used. The durable design is therefore also intended for rental operations, in which the LED wall is regularly assembled, disassembled and transported. Modules measuring 500 x 500 mm and 500 x 1,000 mm are available for assembly. This allows LED walls in different formats to be implemented flexibly. The larger modules reduce installation effort, as fewer assembly steps are required compared with the smaller versions. In addition, only about half the number of receiver cards is required for the same wall area. A8S-N receiver cards from NovaStar are used. Functions such as Dynamic Booster and Image Boost improve color, contrast and brightness and support particularly detailed and brilliant image reproduction. ## One system for three LED wall solutions The walls in the PRO series are each specialized for different areas of application. However, many essential components and operating procedures are identical. This allows the indoor version to be integrated easily into an existing PRO system. Compatibility exists with the Tri-Frame developed specifically for the series. Among other things, this forms the basis for: - Layher scaffolding - Tri-Frame stands for indoor and outdoor applications - LED roll carts - Tri-Frame floor plates The practical click system enables quick and uncomplicated assembly. At the same time, safety and structural requirements remain taken into account. Anyone who already owns material from the other PRO versions can also use it for the indoor wall. In this case, essentially only the appropriate modules are required. If immediate or complete purchase is not planned, modules can be obtained temporarily via the Rental Pool. This rental network allows partners to connect with one another and rent LED technology to each other. The technical data of the LED wall are summarized in the data sheet. ## Module features Pixel pitch: 2.97 mm LED type: SMD 2020 Pixel type: RGB (Sinyopto) Resolution per m²: 336 x 336 px (W x H) Number of pixels per m²: 112,896 Brightness: up to 1,000 Nits Displayable colors: more than 16 million Contrast ratio: 5,000:1 Refresh rate: up to 3,840 Hz Module dimensions: 500 mm width x 1,000 mm height Horizontal viewing angle: 160° Vertical viewing angle: 140° Recommended viewing distance: 3 m Module weight: 13.9 kg Compatible controllers: all NovaStar controllers Front/rear protection rating: IP30 Certificates and tests: ROHS, CE, EMC, NSpRL, photobiological safety ## Further information https://www.led-tek.de/indoor-led-wand-p2bl-pro The PRO series is covered by a three-year warranty. The offer is intended exclusively for commercial customers and is subject to change without notice. The modules are intended for use in households other than private households. Errors and changes excepted. The General Terms and Conditions apply. All prices stated include statutory VAT. _______________________ ## Imprint The products are offered by JC Eventtechnik GmbH. Anna-Vandenhoeck-Ring 5 37081 Göttingen ### Sales Telephone: +49 551 270 725 60 Email: [email protected] ### Service Telephone: +49 551 270 725 61 Email: [email protected] Authorized managing director: Jacek Krawczyk Göttingen HRB 203908 WEEE Reg. No.: DE 38755453 Tax number: 20/200/29523 VAT ID No.: DE286441725 ## Liability for content The contents of the website have been prepared carefully. Nevertheless, no guarantee is given for their accuracy, completeness or timeliness. As a service provider, we are legally responsible for our own content pursuant to § 7 para. 1 TMG. Pursuant to §§ 8 to 10 TMG, however, there is

Specifications