Description

Used professional power amplifier with a power output of 2 × 600 W at 4 Ohm or approximately 2 × 450 W at 8 Ohm. In bridged mono operation, 1200 W at 4 Ohm are available. The fans operate noticeably loudly and may require some getting used to. However, this is typical for older amplifiers of this type. On the other hand, the units are considered extremely robust and virtually indestructible. The foam is missing from the fans on the rear panel. The Clip-Eliminator can be switched on. 8 Ohm FTC rated power per channel: 450 W 4 Ohm FTC rated power per channel: 600 W Bridged mono power: 1200 W FTC rated total harmonic distortion at 4/8 Ohm: 0,5 % Intermodulation distortion: below 0,1 % Input impedance (Line): 15 kOhm Input sensitivity: 1,5 Vrms Gain: 33 dB Frequency range at full rated power: +0/-3 dB at 3 Hz and 80 kHz Slew Rate: 25 V/µs Power consumption: 1500 W Fuse: 12 A, slow-blow Damping factor: 200 at 1 kHz Dimensions (H × W × D): 3,5" × 19" × 12,25" Further information: http://www.carversound.com/carver-amplifiers/pm-1201/ Service and operating documentation: https://www.manualslib.com/manual/618107/Carver-Pm-1201.html Shipping costs within Europe are already included in the price – shipping is free! 20 % VAT can be shown separately. The price is negotiable. A significantly lower price is possible for personal collection. ;-)