Description

Demo unit including protective or transport Case. Compact, fully equipped lighting controller with integrated system and extensive capabilities for professional shows and events. As part of the ONYX platform, it features a bright, adjustable 15.6" Full HD multitouch screen, an additional 3.5" touchscreen, eight freely assignable parameter encoders, a complete keyboard with command section, a dedicated Grandmaster, and ten Playbacks with four freely assignable buttons each. Inside, a powerful Intel-i5-Hexa-Core processor, a fast 250 GB NVMe-M.2 drive, and 16 GB DDR4 RAM provide short startup times, rapid readiness for operation, and direct processing of up to 64 universes without additional external processing hardware. The quiet cooling system uses advanced copper heatpipes. Graphics processing is handled by the integrated graphics processor. The console offers four DMX connections, Timecode, MIDI, and network interfaces. Two Gigabit Ethernet ports allow up to 64 universes to be managed via Art-Net, sACN, or ONYX X-Net. In addition, two external 4K touch monitors can be connected. A CAPTURE Solo Edition license from 2022 is included for visualization and lighting design. Features: Portable and space-saving lighting console with complete equipment Adjustable 15.6" Full HD multitouch screen and support for two external 4K touch displays Integrated processing of up to 64 universes 10 Playbacks, 8 encoders, complete keyboard, and internal 3.5" touchscreen Network, DMX, Timecode, and MIDI connectivity CAPTURE Solo Edition license from 2022 Technical data: SPECIFICATIONS SURFACE 10 Playback faders with 60 mm travel, each equipped with 4 freely assignable function buttons 8 individually configurable multifunction buttons Button for selecting the Playbacks Separate Master-Go section with Go, Pause, Snap, and Release buttons 4 digital rotary encoders with push function and status LED for controlling fixture parameters 4 digital, screen-mounted rotary encoders with push function 3.5" RGB touch display for parameter groups, effect parameters, Fanning, and global timing settings Grandmaster rotary fader with associated button Buttons for Blind, Highlight, Last, and Next Complete numeric keypad as well as command and Command buttons HARDWARE Industrial 15.6" TFT touchscreen in 16:9 format with 1920 × 1080 pixels 250-GB-NVMe-M.2 storage Industrial motherboard with Intel-i5-Hexa-Core-CPU Low-noise thermal design with modern copper heatpipe coolers 16 GB DDR4 memory Integrated graphics unit Windows 10 IoT Embedded as operating system Operating system installation via a USB-3.0 storage medium Support for Windows USB touchscreens CONNECTIONS 4x DMX-/RDM universes In/Out via locking 5-pin XLR connectors External displays: 2x DisplayPort, resolution up to 4K Network: 2x Gigabit RJ45 Ethernet for Art-Net, sACN, and ONYX X-Net Storage and peripherals: 4x USB 3.0, 1x USB 2.0 Audio output and microphone input: 3.5 mm jack each MIDI In/Out/Thru for MIDI Show Control, MIDI Notes, and MIDI Timecode via 5-pin DIN sockets SMPTE-Timecode In/Out via 3-pin XLR 12-VDC power input via 4-pin XLR Desk lamp connection: XLR, 12 V USB input: USB 2.0 Type B PHYSICAL Length: 300 mm (11.9 inches) Width: 540 mm (21.3 inches) Height: 121 mm (4.8 inches) Weight: 9 kg (19.8 lbs.) ELECTRICAL External power supply from mains voltage to 12 VDC, power supply included Rated voltage: 100–240 V, 50/60 Hz Maximum current consumption: 3 A 12-VDC output: 11 A, maximum 132 W Scope of delivery: RGB LED desk lamp with square XLR connector 13" Dust Cover USB cable External 12-V/11-A power supply 1.5 m power cable with 3-pin IEC connector USB-3.0 recovery stick CAPTURE Visualizer SOLO license 2022 Protective or transport Case

Specifications