Description

Set including FOH Rack and Stage Rack. Order online: https://cuesale.com/product/digidesign-venue-profile-set/ Features: 24 bankable input channel strips. Each strip is equipped with a touch-sensitive fader, a multifunction assignable rotary encoder, and dedicated solo, mute and select controls. Every input channel includes an integrated high-pass filter, dynamics processing and EQ. Individual level metering is provided for all input channel strips. The assignable Channel section offers dedicated controls for bus assignment, aux sends, direct output, EQ and dynamics. 8 multifunction output fader strips, each featuring a touch-sensitive fader, encoder, solo, mute and select controls. 1 Mains fader. Outputs can be equipped with up to 24 31-band graphic EQs. Main buses can be configured as Left–Center–Right or Left–Right+Mono. Console I/O: Talkback microphone input with gain adjustment and phantom power. Headphone output. USB connections for a keyboard, mouse or trackball, iLok USB Smart Keys and USB storage devices. VGA output for displaying the software interface on an external monitor. GPI connectivity via DB-25, with 8 GPI inputs and 8 GPI outputs. FOH Rack Features: The FOH Rack is designed for use with one or more Stage Racks and supplies the mix-position I/O for the system. Audio I/O 8 pairs of analogue I/O for hardware inserts or for routing line-level signals to and from the mix position. Analogue and digital two-track inputs and outputs, including AES or S/PDIF. Monitor outputs for near-field monitors at the mix position. Intercom microphone input. Synchronization and Control I/O MIDI In and Out connections, providing 16 MIDI input channels and 16 MIDI output channels. Word clock inputs and outputs for digital clock synchronization. USB 2.0 ports for USB drives, iLoks and other USB equipment. 100 BaseT Ethernet ECx port for remote control over an Ethernet network. Snake connectors for primary and redundant, where applicable, connections to the VENUE Stage Rack. CPU, DSP, and System Drives The FOH Rack contains the CPU, DSP, hard drive and CD-ROM drive required to run the VENUE D-Show software. The system software is factory-installed. The CD-ROM drive can be used to update or restore the system software and to install compatible plug-ins from installer discs. The standard FOH Rack is fitted with three Mix Engine cards for plug-in and mixing DSP. Up to two further Mix Engine cards may be installed, for a total of five. Redundant Power Supply Units (PSUs) Two universal power supply units are included with each FOH Rack. They support 100V to 240V nominal input voltage at 50–60 Hz, feature automatic redundant failover and provide LED status indication. Stage Rack Features: Stage Racks operate together with an FOH Rack and provide all stage audio I/O. Up to two Stage Racks may be used at the same time, supporting up to 96 inputs in total. Audio I/O: 48 inputs with remotely controllable microphone preamps and individually selectable phantom power. 8 analogue output channels, expandable to as many as 48 analogue or digital outputs per Stage Rack. Snake connectors for primary and redundant, where applicable, connections to the VENUE FOH Rack. System Information FOH Rack Configuration Mix Engine Cards 4 IOx Installed FOH Snake Card 2 – FWx FireWire Option Card – HDx1 TDM Option Card – HDx2 TDM Option Card – MADI 1 Option Card Installed MADI 2 Option Card – ECx Ethernet Control Installed External Word Clock – System Software Software Version 3.1.1.286 ECx Ethernet Control Software Version 2.0.0.287 Ethernet Configuration Manually Configured IP Address 192.168.1.25 Subnet Mask 255.255.255.0 Gateway 10.0.0.1 Console Profile Bus ID N/A Personal Q PQ Rack(s) – PQ Controller(s) – Stage Rack Configuration Stage 1 Slot Card Type Slot Card Type A Analog Input (SRI) G – B Analog Input (SRI) H – C Analog Input (SRI) J Analog Output (SRO) D Analog Input (SRI) K – E Analog Input (SRI) L – F Analog Input (SRI) M – Stage 2 Not Detected Price: €6995.00 Ex V.A.T. (MwST) per piece. Prices are excluding 21% VAT / MwSt. The equipment is located in the Netherlands. Customers with a V.A.T. ID number pay 0% V.A.T. / MwSt. Please provide your complete address so we can calculate the shipping quote / price. For additional used equipment, see our other advertisements on this site or visit www.cuesale.com

Specifications