Description

For sale is a very thoughtfully designed headset wireless system in a practical rack configuration. The radio frequencies used are approved in Germany and numerous other European countries. The microphones feature cardioid characteristics and impress with clear sound, low susceptibility to crosstalk, comfortable wear and reliable operation. The set consists of two systems: System 1, divided between two racks: 1 x 8 wireless systems UD 506 in the 655–679 MHz range and 1 x 4 wireless systems UD 508 in the 863–865 MHz range, suitable for smaller productions. System 2 in one rack: 8-channel wireless tabletop microphone system U500 plus 2 x headset wireless systems U508. System 1: The rack for eight wireless systems is designed as a trolley rack with casters, making it convenient to transport. Signal distribution is handled by an antenna splitter and two professional paddle antennas with a range of up to 100 meters. A distance rail for mounting the paddle antennas on a microphone stand is included. It can be transported in a space-saving manner. Both cases are equipped with rack drawers for storing the microphones and beltpack transmitters. Another drawer contains high-quality Eneloop rechargeable batteries and matching Panasonic chargers: the large rack contains 32 rechargeable batteries, the small rack 16. The bodypack transmitters achieve an operating time of approximately ten hours. This provides a complete set of rechargeable batteries for every wireless system. For connection to a mixing console, each rack contains 3 m long XLR multicore cables. The cables are color-coded and numbered and can be neatly stored in the rack. The power supply for both racks is centralized via integrated power strips. Two lavalier microphones are also included. Dual UHF wireless system: with 2 bodypack transmitters and 2 MH3 condenser headset microphones in Beige with cardioid characteristics Frequency range: 655–679 MHz 19-inch True Diversity receiver with 1 HE 96 channels in 8 groups with 12 channels each Audio frequency response: 60–16,000 Hz switchable transmission power: 2 mW, 10 mW or 30 mW frequency scan directly on the receiver automatic frequency scan with infrared transmission of the settings from the receiver to the transmitter pilot tone bright OLED display adjustable 6.3-mm headphone output transmitter operation with 2 AA batteries or rechargeable batteries one XLR and one jack output per channel XLR/jack mix output operation via 13.5-V-DC power supply with 1000 mA BNC connectors for the antennas System 2: The tabletop microphone stations feature a gooseneck condenser microphone with cardioid characteristics and a light ring for status indication. In addition to the XLR microphone connection with 28-V phantom power, the heavy table base provides a button for switching on, switching off and muting. There is also a gain control and a switchable 130-Hz high-pass filter, which effectively reduces the proximity effect and structure-borne noise. An OLED display provides information on the radio frequency, battery status, microphone station number and the assigned group and channel. The 4-channel receiver enables quick setup via automatic frequency and channel search, infrared synchronization, a digital encoder and four buttons for direct access to the individual channels. The display shows all important operating data and settings, including audio and radio signal strength, priority and the charge status of the microphone stations. To minimize crosstalk, feedback and comb-filter effects, the number of simultaneously activated microphones can be defined. An automatic or manual gate setting and the pilot tone support interference-free transmission and high-quality sound reproduction. In addition to the individual channel outputs, the receiver has a summed output. This means that only one channel is required for connection to the mixing console. An access lock protects the settings against unauthorized changes. For smaller events where wireless transmission is not required, the set additionally includes 8 tabletop bases for wired operation and phantom powering of the microphones. As presenters are often used mobile and at the edge of the stage, a dual-headset wireless system with 2 microphones is also included. This can also be used in addition to Rack 1. 3 m long XLR multicore cables are also provided for this rack. They are color-coded and numbered and can be stored in the rack in a space-saving and organized manner. The rack’s power supply is centralized via an integrated power strip. The internal wiring to the frequency splitter and the antennas is already installed. Paddle antennas are included. Operating manuals and frequency overview tables are supplied.