Description

Due to a system change, our last DA230 is for sale. The unit is in very good condition, is supplied in its original box and has a current VDE inspection. Technical data Maximum output power at 4 / 8 Ohm: 2x 1500 / 700 W Amplifier: Two fully digital power amplifiers with a high efficiency of ≥ 90 % Frequency range: 20 Hz – 20 kHz Signal-to-noise ratio, A-weighted / unweighted: 100 / 95 dB Input sensitivity for full-scale operation: analog 0 dB (775 mV) / digital -12 dBFS / without filter in the output channel Crosstalk attenuation at 1 kHz: > 90 dB Damping factor at 1 kHz: > 500 Total harmonic distortion at 1 kHz: < 0.5 % Voltage gain at 4 / 8 Ohm: 40.0 dB Internal slew rate: > 70 V/µs Internal rise time: < 1.5 µs/V Electronic equipment, per channel: Gain, digital crossover, subsonic filter, parametric EQs, dynamics processor, polarity, delay and matrix router Protection circuits: For individual channels: short circuit, DC voltage at the output and impedance below the minimum For the entire unit: undervoltage, overvoltage, overtemperature and overload Maximum power consumption: 2600 W Power supply: 90 – 250 V / 50 – 60 Hz, PowerCon input Operating modes: stereo, mono and 2-channel, freely routable Controls and features: Ground-Free switch, navigation pad, 4 rotary controls with push function, 4 RGB LEDs, LCD graphic display and SD card slot Connections: Line-In: 2x XLR Link-Out: 2x electronically balanced XLR (max. 2x analog or 1x digital & 1x analog) Speaker outputs: 2x Speakon NL4 RSNC module DSP: 24 bit, clocked at 48 MHz Basic delay: < 1.5 ms Sampling: 24 bit Digital input and digital link: Inputs via AES/EBU and S/PDIF with format/sampling-rate converter up to a maximum of 192 kHz Link according to the input format / 24 bit, 48 kHz, AES/EBU Internal memory: 12 presets; additional presets can be stored on an SD card Dimensions (W x H x D): 483 x 88 x 375 mm, 2 RU Weight: 9 kg Sale exclusively to commercial customers and without warranty. Shipping is made to the buyer’s attention.

Specifications