Description

For sale is a rolling rack case with equipment originally configured for a QU-Pac. In its previous setup, it was used together with a Stage-Router, four wireless microphone systems, an antenna splitter, an IEM transmitter and a combiner. Example pictures are available. Lightweight plastic panels were used for the construction, making the case weight-saving. Several connection panels are installed on the side, allowing the connections to be routed through to the mixer inside. The previous connection assignment was as follows: Panel 1: 8x Input Panel 2: side power connection, Main L+R to the venue PA system as well as Mix 9+10 for the own system Panel 3: 2x Mono Out with power and 1x Stereo Out with power Panel 4: rubber grommet for access to the Schuko power strip The front of the case was extended with a strip approximately 5 cm wide. This area allows antennas and further connections to be routed upwards. A second power connection is also installed there. This means that the power cable can remain plugged in if no additional power feed is provided from the side. The front also features: 2x USB connection for charging mobile phones or other devices 3x BNC connection 2x jack 2x XLR On the top is a mount to which, for example, a gooseneck for mounting remote antennas can be attached. Two IEC appliance connectors for the mixer and Stage-Router are installed in the case. The plugs used are secured against accidental slipping out. The scope of delivery includes the case, the permanently installed wiring as shown in the pictures, the power distribution, the Schuko power strip, panel-mount connectors, a USB extension cable and a USB power supply. The devices shown in the example pictures are not included in the sale. In addition to the rolling base, a second base without wheels is included. This was used when the case was placed on a table and was not moved on its wheels in the road environment. The sale is made with an invoice. Liability for defects and warranty are excluded.

Specifications