Description

The device is visually in very good condition. Technically, it functions perfectly. - A functional test of the controller is possible and expressly encouraged. - Shipping can be arranged after prior assumption of the costs. - Sale by a commercial seller; VAT can be shown separately. Description: Input signal processing Input delay: up to 200 ms, adjustable with a resolution of 100 µs Filter: graphic 31-band EQ 4 configurable filters: Bell, LShelv, HShelv, HighP, LowP, AP Gain: digital adjustment from +20 dB to -96 dB Output signal processing Output delay: 40 ms in total, divided into 2 x 20 ms, with 10-µs resolution Filter: 12 filters within the loudspeaker-specific K&F-LS blocks Limiter: RMS and peak limiter in the loudspeaker-specific K&F-LS blocks Gain: digital adjustment from +20 dB to -96 dB Sense inputs Maximum input level: 150 Vrms Gain detection: 20 dB to 45 dB Analog-to-digital inputs Input impedance: 10 kΩ balanced, 10 kΩ unbalanced, electronically balanced Nominal input level: +6 dBu Maximum input level: +18 dBu Frequency range: +0/-0.2 dB, 2 Hz to 20 kHz Total harmonic distortion (THD + Noise): typically 0.0006 % (-105 dB) at 1 kHz/-1 dBfs Dynamic range: typically 118 dB, A-weighted CMRR: 65 dB from 20 Hz to 20 kHz, typically 75 dB at 1 kHz and 70 dB at 20 kHz AES/EBU inputs Supported resolution: up to 24 Bit Supported sample rates: 44.1 to 192 kHz Internal dejittering via a sample-rate converter Digital-to-analog outputs Output impedance: <40 Ω, electronically balanced Nominal output level: +6 dBu Maximum output level: +18 dBu Frequency range: +0/-0.2 dB, 2 Hz to 20 kHz Total harmonic distortion (THD + Noise): typically 0.0006 % (-105 dB) at 1 kHz/-1 dBfs Dynamic range: typically 119 dB, 20 Hz to 20 kHz, A-weighted at +18 dBu Analog-In to Analog-Out Frequency range: 20 Hz to 20 kHz, ±0.1 dB Dynamic range: typically 115 dB, 20 Hz to 20 kHz, unweighted Total harmonic distortion (THD + Noise): 0.0007 % (-103 dB) typically at 1 kHz/+17 dBu 0.001 % (-100 dB) typically at 1 kHz/+6 dBu All gains at zero Converter resolution: 24 Bit Internal sample rate: 96 kHz Internal data path: 28-bit integer Calculation accuracy: 76 Bit Latency: 0.5 ms from analog to analog Remote control RJ45-EtherCon™ socket for a 10/100Base-TX Ethernet (IP) connection Power supply AC 100–240 V~ / 50–60 Hz I nom.: 150–100 mA Dimensions and weight Dimensions (W x H x D*): 483 x 44 x 192 mm, 1 HE for rack mounting *Installation depth including power cable: 260 mm Weight: 1.8 kg No warranty, statutory liability for defects or returns are offered for used equipment. Our General Terms and Conditions apply.

Specifications