Description

For sale is a very well-maintained complete set consisting of a RoboSpot Base Station without camera as well as an ESPRITE FS Follow-Spot. The innovative Follow-Spot system makes it possible to operate up to twelve fixtures simultaneously from a remote location. This eliminates the safety risk as well as the organisational effort involved in deploying Follow-Spot operators at great heights or in the roof areas of stadiums, arenas, concert halls, theatres, as well as TV and film productions. With up to twelve synchronously controlled fixtures, performers can be followed precisely anywhere on stage. In addition, the connected Moving Lights can be used normally via the lighting console for further tasks within the show when not operating in Follow-Spot mode. KeyFacts / Key features 15.6-inch monitor QVGA touchscreen with battery backup 4 encoder wheels 10 preset buttons for direct access to pre-programmed functions Button for activation “Freeze” button for Pan & Tilt Manual movement control with position display on the monitor Two sliders on the handles for immediate access to important functions in the range of 0–100%, such as Dimmer or Iris. The sliders can be assigned to any function of the controlled Moving Head, including Focus, Zoom or Frost. Individual selection of controllable parameters Custom setups can be saved and reloaded via USB Compatible with BMFL FollowSpot / FollowSpot LT, BMFL Spot, BMFL Blade, BMFL WashBeam, BMFL WashBeam EV, iESPRITE®, ESPRITE®, ESPRITE® FS, iFORTE® LTX WB, iFORTE® LTX FS, iFORTE®, iFORTE® FS, FORTE®, FORTE® FS, iPAINTE®, PAINTE®, PAINTE® Spot, TX1 PosiProfile, T1 Profile™, T1 Profile FS™, T2 Profile™, T2 Profile FS™, DL7S Profile™, DL4S Profile™, iSpiider®, iPointe65®, iPointe®, MegaPointe®, Pointe®, SPOTE™, CUETE®, ProMotion™, Viva CMY™, SilverScan™, Tarrantula™, Spiider®, LEDBeam 150™, LEDBeam 350™, iBeam 350™, MMX WashBeam™ and MMX Blade™ Up to 12 devices can be controlled via one Base Station. Additional equipment and various accessories are also available. The ESPRITE Profile is also available in a special Follow-Spot version and can therefore be used optimally with the RoboSpot system. The ESPRITE FS™ features a removable digital camera that is attached to the head of the Moving Light. This enables a direct connection to the Base Station, allowing the fixture to be controlled remotely and precisely as a Follow Spot without an external camera. KeyFacts: Light source Light source type: TE™ 650W HP White Light LED Engine (patented) HP (High Performance) Engine for particularly high light output and balanced colour characteristics Engine light output: 55,000 lm Output light output: 34,000 lm (in the integrating sphere) 27,000 lm (on the projection surface/goniophotometer) Colour temperature at output: 6,700 K CRI: 70; remotely retractable filters enable CRI 80 and CRI 90 Illuminance: 85,000 lx at 5 m Light source type: TE™ 650W HCF White Light LED Engine (patented) HCF (High Colour Fidelity) Engine for particularly high light quality and precise colour reproduction Engine light output: 37,500 lm Output light output: 24,000 lm (in the integrating sphere) 19,000 lm (on the projection surface/goniophotometer) Colour temperature at output: 6,000 K CRI: 96, TLCI: 97, TM-30-18 Rf: 92, TM-30-18 Rg: 99 Illuminance: 59,000 lx at 5 m Minimum LED lifetime: 50,000 hours Typical lumen maintenance after 50,000 hours: L70/B50 Light source warranty: 4 years or 20,000 hours Additional equipment and accessories are available. included: Flightcase for 1 Base Station Set Flightcase for 2 fixtures Omega-Clamps and connection cables are included in the scope of delivery. The fixtures are available immediately. Once payment has been made, the goods can be collected directly or shipped.

Specifications