Description

1,000 Watt are available for the subwoofer, while the two top outputs each deliver 500 Watt – 2,000 Watt RMS in total. XLR inputs and outputs, a PowerCON True1-to-Schuko connection, and a USB interface for the free Labsoft-Mini software are provided. A white Warnex finish is optionally available at no extra charge. Acoustic foam can also be selected at no additional cost. Labrat 12 p available on request for an additional charge, or alternatively Labrat 8 Pro passive. Manufacturer's quote: [ The “LABLIVE fifteen” was designed as a fully active plug-and-play system and enables flexible use as well as particularly straightforward integration. Three Class-D power amplifiers operate in the 15-inch subwoofer enclosure: One power amplifier supplies 1,000 Watt to the bass, while two others each deliver 500 Watt for the two passive outputs on the module panel. The freely programmable DSP can be conveniently configured via the USB interface before installation. Extensive IIR filter options enable precise adaptation to the respective room conditions. Additional zones, systems, or further integration levels can be connected via the fullrange low-frequency outputs. For low-frequency reproduction, an Alnico long-excursion driver is used, driven by an overlength 4-inch voice coil. This effectively reduces unwanted power compression. Four bass reflex ports in the enclosure ensure symmetrical loading through the radiation impedance at the diaphragm. This significantly reduces distortion at high levels. Thanks to the high-impedance design of the LABRAT series, suitable passive top units can be integrated into the system. For example, up to eight LABRAT six p can be combined with the LABLIVE fifteen. This provides a fully active, full-scale and immediately ready-to-use sound reinforcement solution for manageable hospitality and audience areas. Only a playback device is additionally required. ] Product Data 15“ IIR DSP System Sub Series: LABLIVE Model: LABLIVE 15 Dimensions: H 450 x W 534 x D 600 mm Dimensions of inner packaging: H 470 x W 570 x D 615 mm Dimensions of export packaging: H 525 x W 640 x D 670 mm Net weight: 40.5 kg Weight including export packaging: 45.5 kg ——————————————————————————————————————————————————————— Subwoofer channel total output (RMS/Peak): 1000 / 1550 W Maximum sound pressure level (Program): 129 dB Maximum sound pressure level (Peak): 132 dB Crossover: fully internal IIR DSP, control via USB Subwoofer frequency range (-6 dB): 30 Hz – 120 Hz Mid/high-frequency outputs: 2 x powered high-/mid outputs Total output of the mid/high-frequency outputs: 2 x 500 / 700 W at 4 Ohm Low-frequency driver: cone driver, bass reflex-loaded Magnet of the low-frequency driver: Neodymium Diameter of the low-frequency driver: 15“ / 388 mm Voice coil diameter: 4“ / 101.6 mm ... [End of quote] Product photo by Westlab Audio ™ © & ® Accessories such as Cordura protective covers, a dolly board, Labrat 12 p or Speakon cable Sommer Cable Elephant are available on request for an additional charge. A PC or Mac can be connected to the system via USB. The free Labsoft-Mini software with extensive adjustment options can be downloaded for Windows and Mac. Pro Audio test report: https://www.proaudio.de/de/tests/24591-westlab-audio-lablive-fifteen-subwoofer-und-labrat-eight-pro-top-teile.html Data sheet as PDF: https://westlab-audio.com/sites/default/files/downloads/2017-05/Datenblatt%20LV15.pdf Negotiable, small business pursuant to § 19,1 UStG Prices on request.

Specifications